You are not logged in.
Hi.
For some months now (infact since i bought my new
computer) i cannot view TV anymore on my tunner.
I can only listen to radio. Tried to update drivers, update
application, add and/or remove codecs (in the begining i
had no codecs installed at all) , etc...
When i try to switch to TV, i get this:
---------------------------
WFTV.exe - Application Error
---------------------------
The exception Integer division by zero.
(0xc0000094) occurred in the application at location 0x04957dd6.
Click on OK to terminate the program
Click on CANCEL to debug the program
---------------------------
OK Cancel
---------------------------
System specs:
P IV 3.2Ghz
1Gb RAM
40GM HDD
Leadtek GeForce FX 5600 256MB
MB ASUS P4P800SE
Tunner: Winfast TV 2000 XP Deluxe (PCI)
Please help.
Thank you.
Offline
Do you install some COEC pack (K-Lite, Nimo, ATB's, ...etc.) recently ? UnInstall these trouble makers.
Do you use the NERO 6.0.x.x ? Upgrad to 6.6.x.x.
Run the "Windows Media Diagnostic Tool" and post the result (.cab) file.
http://www.microsoft.com/downloads/deta … laylang=en
Offline
Yes i have installed Ace Mega Codec Pack 5.95.121BETA2 but the error appeared before the instalation of codecs too.
I have installed NERO 6.3.0.3.
Offline
(Nero version 6.3.x.xx + Apple QuickTime) causes PVR software crashed.
Please refer to this thread "Nero causing Leadtek WinFast PVR to crash?":
http://www.tv-cards.com/messageboard/vi … php?t=5798
http://forum.chris-tv.com/index.php?showtopic=663
http://club.cdfreaks.com/showthread.php?t=99994
go to Start=>Run and execute the following lines:
regsvr32 /u "C:Program FilesCommon FilesAheadDSFilterNeQTADec.ax"
regsvr32 /u "C:Program FilesCommon FilesAheadDSFilterNeQTVDec.ax"
Offline
Ok, thank you guys, it worked.
This is what i've done:
1. uninstalled nero;
2. updated drivers;
3. updated software;
4. no change to the codecs;
But guess what: now i have teletext :shock: !!!!!!!
Here: http://www.leadtek.com/multimedia/winfa … uxe_1.html says teletext is optional : "Optional on-board FM receiver, MTS, and Teletext features"....
Offline
The Teletext Software Decoder is optional for BT878 based card :
The first version of WinFast PVR does not contain the Teletext Software Decoder.
A year later, the Teletext Software Decoder (OEM from Genesis Digital Innov <GDI>) is packed into WinFast PVR (Leadtek pays GDI for the Teletext Software Decoder).
You can find the gdivbi.ax (and other files) in the folder C:Program FilesWinFastWFTVFM
The Teletext Software Decoder is bundled for CX2388x based card, because Conexant pays GDI for the Teletext Software Decoder.
Offline